As you saw from my previous post I went full on atomic space age for my home office. I had to do a few DIYs to make it exactly what I wanted it to be, but my favorite is probably this astrodeer!
This project required some Frankenstein style surgery, but I’m really thrilled with the way it turned out. Here’s what I did!
Ok I’m going to admit right now I didn’t take process photos because I’m the worst and I wasn’t even sure it was going to work, BUT luckily it’s a pretty straight forward process. (Note: I’m going to make one for a friend so I’ll try to update this post with photos when I do!)
In order to get the deer’s head into the terrarium, but still have the helmet in the position I wanted, I had to make cuts on the points shown below.
I added paper ears and eyes and placed the head in the terrarium. Once the head was in the terrarium (from here on known as the helmet) I reattached the bottom part of the antlers, and the upper part of the neck with craft glue and used chopsticks to help get where I had trouble reaching. Once it was dry, I used wet strips of paper bag and glue to cover the cut seams.
Then I used hot glue to attach the rest of the antler to the top of the helmet, and the helmet to body. I used a black sharpie to draw on the hooves and a nose, then I covered the body in foil tape, and covered all the glue joints with tinsel wire and garlands.
There it is! My new spacey pet. Isn’t he a cutie?