Oh man, I’m so excited to show you guys this project! I have to admit that I’ve had this idea for awhile but was hesitant to go through with it. Decoupage can get messy and sometimes I’m just not in the mood for the daunting task of cleaning up. But thanks to method’s #fearnomess campaign I was inspired to get down and dirty and tackle this decor project that I’ve been putting off for months! I can honestly say I love method and have been using their products for years to help me with prep and clean-up for even my messiest projects, so I jumped at the opportunity to team up with them to inspire you to do the same. Plus the fact that the products are safe, biodegradable, AND smell fantastic can make us feel even better about cleaning up. Did I mention they’re super cute and colorful too?

Now let’s get to the project! I’ve had this white and gold portable record player for a couple of years and although it’s beautiful just as it is, I thought it needed a little makeover to stand out against my white walls. I love colorful patterns and thought this fabric would look amaaaaazing on it…

…and I was right!

Here’s how I did it:

First I cleaned off any dust and grime with my method all-purpose cleaner.

Next, took off any removable hardware and used a brush to apply a layer of fabric decoupage medium.

Then I applied a piece of fabric that was cut to size and laid it evenly on the decoupage medium. I smoothed out any wrinkles and bubbles, pulling the fabric tight around the edges. For the corners I basically used the “hospital corners” technique (like when you’re making a bed).

The metal corner plates weren’t removable so I used an exact I knife to trim around the edges and tucked any excess fabric under the plate. This gave it a nice finish. Plus the decoupage deters any fraying of the fabric and leaves edges looking tidy. Don’t worry about getting the medium on those areas, they clean up well with a spritz of cleaner.

After the lid was done, I repeated the same steps for the bottom (trimming around any other non-removable pieces).

I carefully removed the turntable platter base and tucked the fabric inside, then replaced the panel. Next I cut around the front speakers with an exacto knife and tucked the raw edge in around the speakers. These steps gave it a really clean, finished look.

All that was left was to do was apply a piece of fabric to finish the underside of the lid and to replace any hardware that was removed.

I gave everything a quick wipe down with some cleaner and done!

Cute right??? I’m IN LOVE and so glad I decided to #fearnomess. Now it’s your turn! 

This post was sponsored by method products.